Seamless gutter installation
Seams that drip, runs that sag, or gutters that can't handle a summer storm? Seamless gutters are formed at your house to the exact length of each wall.
Seamless gutters are made on site. The installer runs a coil of prepainted aluminum through a forming machine on the truck and cuts each piece to the length of the wall, so straight runs have no joints at all. The only seams left are at corners and end caps, which leaves far fewer spots to leak than sectional gutters joined every ten feet.
When is it time to replace gutters?
- Joints that start dripping again soon after being resealed
- Runs that sag, hold water or tip away from the fascia
- Rust on old steel gutters or cracking vinyl
- Overflow during ordinary rain even right after cleaning
- Rotten fascia boards behind the gutter
- A new roof on the schedule, which is a natural time to redo gutters
Should I get 5-inch or 6-inch gutters?
Five-inch K-style is the standard size on most homes. Six-inch gutters hold and move a good deal more water, and they're worth considering for large or steep roof planes, long runs and valleys that pour into one corner. They're usually paired with 3-by-4-inch downspouts, which carry more water and clog less often than the common 2-by-3 size. Many Morgantown houses have tall, steep roofs and a downhill wall two or three stories high, so ask the installer to explain the size for each side of the house rather than one size for all of it.
Which gutter materials make sense?
- Aluminum. The everyday choice. It doesn't rust, comes in many colors and forms well into seamless runs.
- Copper. Costly but long-lasting, often in a half-round shape that suits older brick and frame houses.
- Steel. Heavier and stiffer, but it can rust once the coating wears.
- Vinyl. Inexpensive and sold for DIY, but it comes in sections and can crack in cold weather.
What does a good installation include?
- A steady slope toward each downspout
- Hidden hangers spaced closely and screwed into solid wood
- Enough downspouts for the roof area, placed at the low ends
- Soft fascia replaced before the new gutter goes up
- Downspouts that discharge away from the foundation and the slope below
What drives the cost of new gutters?
- Total linear feet and number of downspouts.
- Size and material. Six-inch and copper cost more than 5-inch aluminum.
- Height, roof pitch and access on a sloped lot.
- Tear-off and wood repair.
- Guards. Adding them during installation is usually cheaper than a second trip.
We don't quote prices. The installer prices the job after measuring each run, counting downspouts and seeing how tall and steep the roof is and how hard the lot is to ladder, so any figure you hear before that visit is only a rough starting point.
Where we connect you with help
Common questions
Do I need a permit for new gutters in Morgantown?
The city says a permit is required whenever a structure is altered or repaired, and most projects need one. Ask the city's Code Enforcement office, or let your installer confirm before work starts.
How long do seamless aluminum gutters last?
Installed well and kept clear, they commonly last for decades. Corner sealant and hangers may need attention sooner.
Related services
More background: Morgantown gutter guard guide.
Gutters packed with leaves again, or spilling over in every storm?
Call and get connected with a gutter installer in the Morgantown area who can look at your roofline and quote guards.